The Pro Tire Dressing Applicator is the larger profile foam tool built for the tires that don't fit on a sedan. Trucks, SUVs, Jeeps, lifted off road builds, and oversized performance tires. A wider, taller foam face that covers more sidewall in fewer passes, delivers even coverage across deep aggressive sidewalls, and meters the right amount of dressing across the larger surface area without over applying.

The same controlled foam chemistry as the Low Pro Applicator. Absorbs and releases dressing in a measured, even layer that eliminates sling, prevents streaking, and finishes each tire in a single smooth pass. Compatible with every tire dressing in your kit, water based or solvent based, gel or liquid. Manufactured for pro detailers and built to handle the volume that comes with full size trucks and oversized fleets.

Key Benefits

• Built for Large Tires — Larger foam face covers more sidewall per pass on trucks, SUVs, Jeeps, and oversized performance tires
• Meters the Right Amount — Dense foam absorbs and releases dressing in controlled volume, eliminating over application and sling
• Even, Streak Free Coverage — Lays down a uniform layer across deep, aggressive sidewalls in a single pass
• Works With Every Dressing — Compatible with water based, solvent based, gel, and liquid tire dressings
• Reusable — Rinse clean after use and rotate through your kit for dozens of applications
• Pro Detailer Tested — The applicator high volume shops reach for when the tires are oversized

How to Use

 Pour a small amount of tire dressing onto the flat foam face of the applicator. Less is more, even on a larger applicator. Press the applicator against the tire sidewall and work around the full circumference of the tire in a single smooth pass, keeping the foam flat against the rubber for even contact. The larger profile lets you cover the full sidewall height in a single pass on most truck and SUV tires. Reload the applicator with dressing only as needed. For a higher gloss finish, allow the first coat to dry and apply a second coat the same way.

Care Instructions

Rinse the applicator with warm water immediately after use to remove dressing buildup. Squeeze out excess water and air dry. Store in a clean, dry location away from direct sunlight. Replace when the foam begins to break down or loses its shape.

Pro Tip

 For shops and mobile detailers running mixed fleets, keep both the Low Pro and the Pro applicator in your kit. Use the Pro for trucks, SUVs, and oversized tires, and switch to the Low Pro for sedans, sports cars, and tighter sidewalls. The two size system handles every vehicle that rolls in without compromising on coverage or finish.