The Low Pro Tire Dressing Applicator is the simple foam tool that solves the two biggest problems with tire dressing. Too much product, and uneven coverage. The dense, contoured foam meters dressing onto the sidewall in a controlled, even layer so you get full coverage without the puddling that causes sling and the streaking that ruins an otherwise clean finish.

A low profile shape means the applicator hugs the curve of the sidewall and reaches into the gap between the tire and the wheel without dragging product onto the wheel face. Compatible with every tire dressing in your kit, water based or solvent based, gel or liquid. Manufactured for pro detailers and built to last through dozens of applications when properly cared for.

Key Benefits

• Meters the Right Amount — Dense foam absorbs and releases dressing in controlled volume, eliminating over application and sling
• Low Profile Contour Shape — Hugs the sidewall and reaches the tire to wheel gap without contacting the wheel face
• Even, Streak Free Coverage — Lays down a uniform layer across the full sidewall in a single pass
• Works With Every Dressing — Compatible with water based, solvent based, gel, and liquid tire dressings
• Reusable — Rinse clean after use and rotate through your kit for dozens of applications
• Pro Detailer Tested — The applicator shape that high volume shops and mobile detailers reach for first

How to Use

 Pour a small amount of tire dressing onto the flat foam face of the applicator. Less is more. Press the applicator against the tire sidewall and work around the full circumference of the tire in a single smooth pass, keeping the foam flat against the rubber for even contact. Reload the applicator with dressing only as needed. For a higher gloss finish, allow the first coat to dry and apply a second coat the same way.

Care Instructions

Rinse the applicator with warm water immediately after use to remove dressing buildup. Squeeze out excess water and air dry. Store in a clean, dry location away from direct sunlight. Replace when the foam begins to break down or loses its shape.

Pro Tip

 Dedicate one applicator per type of dressing in your kit. A clean applicator for water based dressings and a separate one for solvent based dressings keeps formulas from cross contaminating and extends the life of both products.