Cannon Soap

Few things in a wash matter more than the first thirty seconds. That's when your soap either lifts contamination away from the paint or grinds it across the clear coat. Cannon Soap is built for that moment. The pH neutral formula generates a dense, clinging foam that blankets every panel, encapsulating road film, dust, and traffic grime so it releases on contact rather than under your wash mitt.

Engineered around the way foam cannons and foam guns actually deliver soap, Cannon Soap atomizes into a rich, shaving cream texture that holds to vertical surfaces long enough to do real work. The concentrated formula stretches further per ounce than most washes on the market, and because it's pH neutral, it preserves waxes, sealants, and ceramic coatings underneath. Safe on glass, paint, plastic, raw aluminum, headlights, and matte finishes — and proudly blended in the USA.

Key Benefits:

• Foam Cannon Optimized: Formulated specifically for the air injection and pressure dynamics of foam cannons and foam guns, producing the thick clinging suds those tools were designed to deliver.
• pH Neutral Formula: Cleans without stripping existing wax, sealant, or ceramic protection, so your last layer of defense stays intact wash after wash.
• Encapsulating Lubricity: Suspends dirt and road contamination in a slick film, putting a true barrier between your wash media and the clear coat to reduce the risk of wash induced marring.
• Concentrated Yield: Just 2 to 4 ounces per liter produces a full panel covering foam, so a single gallon stretches across dozens of washes.
• Rinses Clean: Sheets off paint and glass without leaving streaks, residue, or surfactant haze, even in direct sunlight.
• Surface Safe Across the Board: Trusted on clear coat, single stage paint, vinyl wraps, matte finishes, glass, headlights, plastic trim, and raw aluminum.

How to Use:

Begin with a thorough rinse to knock loose dirt and grit off the paint. Fill your foam cannon or foam gun reservoir with cool water and add 2 to 4 ounces of Cannon Soap per liter, then shake gently to mix. Lay down a thick, even blanket of foam across the entire vehicle, working top to bottom, and allow the foam to dwell for one to two minutes so the surfactants can lift and suspend contamination. Follow with a two bucket contact wash for a full detail, or rinse thoroughly for a touchless maintenance wash. Rinse from the top down and dry promptly with a clean microfiber.

Pro Tip:

For the cleanest possible finish, pair Cannon Soap with a true two bucket method and a plush wash mitt, then follow your rinse with Jax Wax Spray Wax or Hawaiian Shine as a quick drying aid. The slick surface left behind by Cannon Soap gives your topper something premium to bond to, which means deeper gloss, more slickness underhand, and longer lasting beading between full detail sessions. For especially heavy soiling, lay down a foam pre soak, rinse, and then come back with a second foam wash and contact mitt — the two pass approach is how the pros keep swirl marks out of black paint.